There are several reasons for this:.

The strong acidity of white vinegar is also why it needs to be diluted for most tasks though.. How to Treat Carpet Stains With White Vinegar.Once you’ve tested a patch of carpet to check that white vinegar won’t cause discolouration, here’s the process for using it to treat a stain:.

For new stains, blot up as much as possible with a paper towel.If the stain is old, give the area a vacuum to remove any loose debris..Create a mixture of one tablespoon white vinegar, 1/4 teaspoon of washing up liquid, and 250ml of warm water.. Use a white cloth to apply the mixture to the stain.

Use a blotting technique to apply small amounts of the mixture, then frequently dab it dry with a different white cloth.. Repeat this process until the stain has been removed.. Rinse the area by sponging cold water into the carpet fibres.Then use a blotting action to remove the excess water..

Allow the patch of carpet to fully air dry.

You can also use paper towels to remove moisture from the carpet so that it dries faster..Remove the dust cup from the vacuum by pressing the button at the top of the main body and tilting the cup towards you..

Hold the dust cup over a bin and press the bottom release tab to allow the contents to fall into the bin.Give it a quick shake or tap to dislodge any stuck debris.. Now use the top release tab to open the top lid while holding the cup over the bin.

Again, give it a little shake or tap.We find that hair sometimes gets caught around the metal shroud inside the second compartment of the Shark Lift-Away, so you may need to pull this out by hand (use gloves).. Close both of the lids and reattach the cup to the vacuum.. It’s a good idea to check the pre-motor filter when emptying the vacuum.